Now you might think that spraying lighter gas in this area a hot engine isnt wise, however the flash /ignition tapering off of gas is nearly 400C hence you habit a naked flame or spark to set it off and Ive used this method for many years without incident. acquit yourself your exaggeration through each reachable joint one at a era and you should find it. I use a slightly flattened piece of brake pipe and some rubber hose from the can of lighter gas to manage to pay for a spraying wand and permit a adopt blast of gas into each area, especially those difficult to reach bearing in mind large implements.
Might after that be worth checking the wiring and connector to the airflow meter for any signs of corrosion or damage. you can attain a fast malfunction find if you unplug the meter and govern the engine without it. if the engine condition is the same then chances are the meter or the membership to it is faulty. Its along with worth cleaning the MAF sensor wires, as they can acquire coated in the manner of dirt on top of period which after that offsets the reading. Use some entre cleaner or brake cleaner to spray can onto the wires to remove the dirt on no account lie alongside the wires next everything as they are completely fragile
Hi, attain you still habit help? Bear in mind that the site takes a mass from you at the dawn and this is held by the site until you rate my respond at which reduction the cash is split in the middle of the site and the expert. I am solitary paid for my doing upon this ask if you rate my answer, using the star system at the top of the screen. keep busy realize not forget! Thank you