HI, The front bumper lid has to arrive off as a couple of demean headlamp assembly bolts are located in back it. Here are directions keep busy recall to rate bolster using the rating page thus that I may get credit. Thanks
Might plus be worth checking the wiring and connector to the airflow meter for any signs of corrosion or damage. you can pull off a quick aberration locate if you unplug the meter and run the engine without it. if the engine condition is the same after that chances are the meter or the link to it is faulty. Its next worth cleaning the MAF sensor wires, as they can get coated in the manner of dirt over times which then offsets the reading. Use some edit cleaner or brake cleaner to spray can onto the wires to surgically remove the dirt upon no account touch the wires bearing in mind whatever as they are agreed fragile
I don't have any check engine lights unless I unplug the MAF sensor. bearing in mind the MAF is plugged in after that the car will stall unless I put my foot upon the accelerator. There is then an intermittent popping sealed coming at idle.