HI, The tummy bumper lid has to come off as a couple of belittle headlamp assembly bolts are located astern it. Here are directions entertain remember to rate support using the rating page for that reason that I may get credit. Thanks
Might moreover be worth checking the wiring and connector to the airflow meter for any signs of corrosion or damage. you can do a fast malformation locate if you unplug the meter and control the engine without it. if the engine condition is the similar later chances are the meter or the membership to it is faulty. Its plus worth cleaning the MAF sensor wires, as they can get coated like dirt more than become old which after that offsets the reading. Use some read cleaner or brake cleaner to vaporizer onto the wires to cut off the dirt upon no account adjoin the wires taking into account whatever as they are enormously fragile
I don't have any check engine lights unless I unplug the MAF sensor. bearing in mind the MAF is plugged in then the car will stall unless I put my foot on the accelerator. There is after that an intermittent popping unquestionable coming at idle.