HI, The belly bumper lid has to arrive off as a couple of lower headlamp assembly bolts are located astern it. Here are directions occupy recall to rate support using the rating page for that reason that I may get credit. Thanks
Thanks for your response. I just checked what you mentioned, that I hadn't already checked, except fuel pressure.Let me say you a tiny more approximately the difficulty history. It currently has a master tech ascribed idle ventilate rule valve and tps installed. without upsetting anything, the last (used) ecu and my original, would manage in the car without this symptom.
Hello the TPS does have an effect upon switching the car into idle mode thus I'd recommend to create distinct the throttle plate is 100% closed and not slightly high and dry with carbon. and after that acclimatize the TPS correspondingly that the IDL pin is continuous to the E2 fix later the throttle is closed, and log on circuit past the throttle is just cracked. Don't worry just about any voltages, the IDL gain access to is the essentially important one.