HI, The front bumper cover has to arrive off as a couple of lower headlamp assembly bolts are located at the back it. Here are directions make smile remember to rate advance using the rating page as a result that I may get credit. Thanks
I bought it in July, drove it home from LA (to Utah), and the problems started sharply after I got it home.Any further urge on you can offer is appreciated. I don't know what else to pull off but take it help to the dealer. I know I've got the shop foreman dynamic upon it at the dealer, but I still mood its pushed to the back up as its obsolescent and everyone loses in this situation.
This could be a large vacuum leak ,with the MAF combined it is unaided measuring the ventilate that is getting past the MAF, in view of that if the intake manifold is sucking in let breathe the freshen to fuel ratio will be unconditionally out and cause the engine to stall. If MAF is disconnected the engine goes into a limp measurement and lets the engine run. as soon as carb cleaner spray vaporizer in the area of the hissing later than the engine dealing out and later you hear the engine stall or rev unconventional there is the leak ,could be a bad vacuum hose bad gasket upon the manifold.