HI, The belly bumper lid has to come off as a couple of subjugate headlamp assembly bolts are located behind it. Here are directions divert remember to rate utility using the rating page hence that I may receive credit. Thanks
I bought it in July, drove it house from LA (to Utah), and the problems started hastily after I got it home.Any additional urge on you can have enough money is appreciated. I don't know what else to reach but say you will it put up to to the dealer. I know I've got the shop foreman energetic on it at the dealer, but I yet mood its pushed to the back up as its out of date and everyone loses in this situation.
This could be a large vacuum leak ,with the MAF amalgamated it is solitary measuring the let breathe that is getting in the same way as the MAF, hence if the intake manifold is sucking in air the let breathe to fuel ratio will be unquestionably out and cause the engine to stall. If MAF is disconnected the engine goes into a limp measurement and lets the engine run. in the same way as carb cleaner spray can spray in the place of the hissing like the engine management and in imitation of you hear the engine stall or rev highly developed there is the leak ,could be a bad vacuum hose bad gasket on the manifold.