HI, The front bumper lid has to come off as a couple of degrade headlamp assembly bolts are located behind it. Here are directions interest remember to rate relieve using the rating page in view of that that I may get credit. Thanks
Might in addition to be worth checking the wiring and connector to the airflow meter for any signs of corrosion or damage. you can get a quick idiosyncrasy find if you unplug the meter and run the engine without it. if the engine condition is the same after that chances are the meter or the relationship to it is faulty. Its as well as worth cleaning the MAF sensor wires, as they can acquire coated bearing in mind dirt higher than time which then offsets the reading. Use some right of entry cleaner or brake cleaner to vaporizer onto the wires to separate the dirt upon no account be next to the wires like anything as they are agreed fragile
I don't have any check engine lights unless I unplug the MAF sensor. in the same way as the MAF is plugged in subsequently the car will stall unless I put my foot upon the accelerator. There is as a consequence an intermittent popping unassailable coming at idle.